|
 |
Farm & Commercial Systems - Deep Well |
 |
| Surface Mounted Deep Well Pumps -
For depths to 50 metres The Davey range of quality Australian-made deep well pumps and pressure systems is ideal for handling suction lifts beyond 7.5 metres. By submerging the jet and venturi down the bore, flows can be provided from as deep as 50 metres. To make installation and servicing easier, the pump is conveniently installed at ground level. The 95D, 125D, 165D and Prime Jet 240 are able to retrieve water from depths to 50 metres and can produce flows up to 194 Lpm from shallower depths. The 95D, 125D, 165D models feature a unique pump casing cast in marine grade aluminium, lined with a strong engineering plastic to ensure extremely high corrosion resistance and the ability to withstand the harsh operating conditions often encountered in pumping water from bores, wells, etc. The powerful Prime Jet 240 is made of cast iron to cater for the higher operating pressures. Davey deep well pumps are fitted with the Davey automatic demand response (ADR) valve to ensure peak performance at all times and help protect against loss of prime. Davey deep well systems can also be installed in horizontally offset situations to draw water from distant dams, rivers, etc. This allows the pump to be mounted away from the source of water to gain access to power, or in places where there is the possibility of flooding. All Davey deep well pumps feature IP56 Rated TEFC (Totally Enclosed Fan Cooled) Motors to help exclude dust, water and vermin. Where electric power is not available, a Davey engine driven pump can be combined with a deep well injector to deliver water from deep bores. For fitting configurations refer here. |
 |
 |
Prime Jet 240 |
165D |
Pump Specifications NOTE |
|
© Steve Cselka 2002 - 2007 |
