GARLON* 600 FOR BLACKBERRY
THE HERBICIDE FOR THE ECONOMY JOB

To unlock the potential of unproductive pastureland which has been overrun by large-scale infestations of blackberry, turn to GARLON* 600 for the economy job. It won’t affect grasses and there is no need to move your livestock during application. This will help you improve your pasture economically and bring this hardy noxious weed under satisfactory control.

GARLON 600 is the most cost-effective product available for the control of large-scale areas of blackberry. Compare its cost per 100 litres of spray with its major competitors. You’ll be pleasantly surprised.

GARLON 600 is not a residual product and follow-up applications will be required. As part of a follow-up programme, or for a superior performance against blackberry, we would recommend our product GRAZON* Double Strength (DS). GRAZON DS has a residual action, a broader spectrum and a superior efficacy to GARLON 600. It may be a little more expensive but it will give you a premium job.

So, if you are trying to get large areas of blackberry under control economically, use GARLON 600. It’s the herbicide for the economy job. And for the follow-up eradication program on smaller patches, use GRAZON DS for the premium job.

The result of this program should be revitalised pastures of profitable grazing land for your livestock.

GARLON 600 weed control programs should be conducted according to our Product and Environment Policy, a copy of which is available on request from DowElanco.

THE PROGRAMMED APPROACH TO BLACKBERRY CONTROL

A programmed approach to blackberry control over several years combining both chemical treatment and management is necessary because of the persistent nature of the weed. A single chemical treatment will not completely control blackberry, as some regrowth will undoubtedly be experienced. If follow up spraying is not carried out, bushes will return to their original condition.

TIMING

GARLON 600 can be applied from late spring to early autumn for most effective control provided sufficient soil moisture is present and the blackberry is growing actively. The use of GARLON 600 under extremely dry conditions is not recommended as considerable regrowth may occur. When goats or slashing have been used to control blackberry, the bushes should be allowed one year’s growth before spraying.

WEATHER CONDITIONS

Foliar absorption following spraying with GARLON 600 is sufficiently fast that light rain within one hour is unlikely to adversely affect blackberry control.

APPROACH TO DIFFERENT SITUATIONS

Situation 1 – Dense Blackberry covering large areas.

Option A
Year 1: Use GARLON 600 to reduce the blackberry to more manageable proportions.
Year 2: Use DowElanco GRAZON* DS to treat regrowth greater than 1 metre in length.
Year 3: Check treated areas for any regrowth and spot spray with GRAZON DS.

Option B
Year 1: Use GRAZON DS at recommended rates. Because of its superior efficacy, regrowth will be minimal. You will save time and money with less retreatments.

Situation 2 – Blackberry in areas with associated woody weeds.

Where you have blackberry growing in areas where there are other woody weed problems such as African boxthorn, gorse, hawthorn, lantern or sweetbriar, use GRAZON DS. It is effective against all these species.

Situation 3 – Blackberry growing next to desirable plants.

GARLON 600 can be used to control blackberry growing in association with desirable plants such as Eucalypts provided these are not directly sprayed or contacted by spray drift.

Situation 4 – Difficult to kill blackberry.

For difficult to kill blackberry varieties or hybrids, use GRAZON DS for the premium job.

MANAGEMENT AFTER SPRAYING

Removal of dead canes by burning or crushing is an important feature of the blackberry control programme. However, these practices should not be carried out earlier than six months after spraying.

The removal of dead canes makes retreatment easier, reduces the amount of herbicide required for follow-up treatments and enables stock to graze in the pasture growth that follows spraying. Where can removal leaves bare soil, oversowing with a recommended pasture mixture for the area is advisable.

Regrowth should be allowed to reach 1 metre in length before respraying is commenced.

Grasses are not normally affected by high-volume spraying in water. Livestock can safely remain in the paddock during and after treatment, as no withholding period is applicable.

Residues of GARLON 600 in the soil are shot lived.

WHERE CHEMICALS OTHER THAN GARLON 600 OR GRAZON DS HAVE BEEN USED, ALLOW TWO SEASONS REGROWTH TO OCCUR BEFORE RESPRAYING WITH GARLON 600 OR GRAZON DS. HOWEVER, PLEASE NOTE THAT WHERE GARLON 600 OR GRAZON DS HAVE BEEN APPLIED, PLANTS CAN BE RETREATED IN THE FOLLOWING SEASON AS PART OF YOUR MANAGEMENT PROGRAM.

OTHER WOODY WEEDS

A major advantage of GARLON 600 is that it can be mixed in either diesel or water and applied by a variety of application methods.

APPLICATION TECHNIQUES

High Volume: Thorough coverage of both leaf and stem tissue is essential. The addition of Decol S35B anionic wetting agent will also give optimum results on eucalyptus regrowth.

Low Volume/High Concentrate: GARLON 600 is registered for application by mistblower, controlled droplet equipment such as Micron Herbi, gas-gun and sprinkler sprayers. For best results, apply to actively growing plants.

Aerial: GARLON 600 can be applied to blackberry by aircraft to control large infestations in inaccessible areas a long way from water.

GARLON 600 can be mixed in diesel and applied as a basal spray or cut stump treatment

BASAL SPRAY: This method is used to treat certain woody weeds such as eucalypt regrowth and rubbervine. Spray individual plants less than 5cm in basal diameter. The whole circumference of the stem should be sprayed from ground level to a height of 30cm.

CUT STUMP: This application method of GARLON 600 is generally used on saplings of eucalypt regrowth (and other problem species) that are too small to be stem injected with TORDON* TCH, and when the bark tissue is too thick for GARLON 600 basal spray treatment.
The stems should be cut no higher than 10-15cm from ground level and the spray or swab application made immediately - before the sapling can seal the cut which would prevent the chemical's penetration into the sapstream.
After basal bark spraying with diesel distillate however, there may be some damage to grass around the base of the stem.
Clovers and other desirable broadleaf plants present at the time of spraying will be killed, but will reestablish rapidly from seed.

SPECIES CONTROLLED

Australian blackthorn Crofton weed Paddy melon
Afghan, Bitter or Camel melon Eucalypt regrowth Prickly Acacia
Angophora English broom Prickly Pear
African boxthorn False sandalwood Privet
Banksia Fennel Rubbervine
Bitter bark Gorse Saffron thistle
Blackberry Green cestrum Silver wattle
Brigalow regrowth Green wattle St. John's wort
Broom Groundsel bush Sweetbriar
Brown sandalwood Hawthorn Teatree
Camphor laurel (seedling) Horehound Tiger pear
Capeweed Lantana Tree of
Caster oil Limebush heaven
Chinese apple Mistflower Wattles
Cockspur Needlewood Wild tobacco
Common Prickly Pear Olive Yellowwood
Application Technique
Weeds
Controlled
State
General Rate /
100L of water
ML
Knapsack Rate/
15L of water
ML
HIGH VOLUME SPRAYING
Blackberry
Qld, NSW,
Vic, SA,
WA only
170
25
   
Tas only
85 or 170
15 or 25
  Seedling Camphor laurel
(up to 3m tall) English broom
All States
170
25
  Green cestrum
Qld, NSW,
Vic
  Brooms
SA only
  Eucalypts (seedling and regrowth
from small lignotubers), Banksia
and Angophora
All States
400 or 560
60 or 90
  Wattles (including silver
and black
wattle), Groundsel bush
All States
170 or 320
25 or 50
  Brigalow
Qld, NSW,
only
170
25
  Gorse
All States
170 or 340
25 or 50
  Common Prickly Pear,
Tiger pear
3000
450
  St. Johns wort
NSW, Vic,
Tas only
170
25
  Fennel, African boxthorn,
Horehound, Broom
Tas only
170
25
  Saffron thistle, (up to bud stage), Capeweed
80
12

To avoid damaging desirable, susceptible plants, precautions should be taken according to label directions.

*Trademark of DowElanco

The information contained in these pages is intended as a general guide only. Chemical products are constantly changing in formulation, strength of active ingredients, registered uses and withholding periods - ALWAYS READ THE PRODUCT LABEL CAREFULLY AND USE PRODUCTS ONLY ACCORDING TO LABEL DIRECTIONS AND ONLY ON THOSE CROPS OR USES AS SPECIFIED ON THE LABEL.

© Steve Cselka 2002 - 2010